Identifier GUID-A99140DB-7AF3-4218-B305-532FF94DF51D
Status Released
Replacing the power-adapter port
WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside
your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance.
Identifier GUID-1420135E-026E-4C25-B293-F1127C87C1E7
Status Released
Procedure
1 Align the screw hole on the power-adapter port with the screw hole on the palm rest and keyboard assembly.
2 Replace the screw (M2x2) that secures the power-adapter port to the palm rest and keyboard assembly.
3 Route the power-adapter port cable through the routing guides on the palm rest and keyboard assembly.
4 Connect the power-adapter port cable to the system board.
5 Close the right hinge.
6 Replace the three screws (M2.5x5) that secure the right hinge to the system board and palm rest assembly.
29
58 Replacing the power-adapter port