Dell P75F User Manual

Identifier GUID-EFFE3DA7-AFC7-4BB0-92C9-4A1B23C2F2F5
Status Released
Removing the solid-state drive/Intel Optane
memory module
You need to disable the Intel Optane memory before removing Intel Optane memory module from your computer. For more information
about disabling the Intel Optane memory, see Disabling Intel Optane memory.
WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside
your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance.
Identifier GUID-34811F23-7A7F-4B2B-8C5C-F676882335D1
Status Released
Prerequisites
Remove the base cover.
Identifier GUID-60EDC575-E10E-4CB3-BEA4-0B07072983EB
Status Released
Procedure
1 Loosen the two captive screws that secure the solid-state drive shield/Intel Optane shield and solid-state drive/Intel Optane to the
palm rest and keyboard assembly.
NOTE
: solid-state drive shield/Intel Optane shield is available only on computers shipped with NVMe solid-state drive/
Intel Optane. In computers shipped with SATA solid-state drive/Intel Optane, remove the screw (M2x2.2) that secures
the solid-state drive/Intel Optane to the palm rest and keyboard assembly.
2 Lift the solid-state drive shield/Intel Optane shield o the palm rest and keyboard assembly.
3 Slide and remove the solid-state drive/Intel Optane from the solid-state drive/Intel Optane slot.
18
Removing the solid-state drive/Intel Optane memory module 39

Dell P75F Specifications

General

Brand	Dell
Model	P75F
Category	Laptop
Language	English