Dell PowerConnect 2808 User Manual

Dell PowerConnect 28xx Systems User Guide 63
Defining Device IP Addresses
The IP Addressing page contains a link to the IP Interface Parameters page that is used to assign the
device IP address, subnet mask and default gateway, and for enabling or disabling DHCP.
To open the IP Addressing page, click System
 IP Addressing in the tree view.
Defining IP Interface Parameters
To open the IP Interface Parameters page, click System IP Addressing  IP Interface Parameters in
the tree view.
Figure 6-6. IP Interface Parameters
• DHCP — The DHCP client can be enabled to acquire the network configuration dynamically. The
DHCP default value is Disable. This field enables the DHCP client.
•
IP Address — Specifies the IP Address currently assigned to the device.
•
Subnet Mask — Specifies the subnet mask of the IP Address, currently assigned to the device.
•
Default Gateway — Specifies the Default Gateway Address, currently assigned to the device.
Setting static IP Interface parameters:
1 Open the IP Interface Parameters page .
2 Set the IP Address , Subnet Mask and Default Gateway .
3 Click Apply Changes .
The static interface parameters are set and the device is updated.

Dell PowerConnect 2808 Specifications

General

Brand	Dell
Model	PowerConnect 2808
Category	Switch
Language	English