70 Installing System Components
Figure 3-11. Installing and Removing the Fan Assembly
Installing the Fan Assembly
1
Align the holes in the fan assembly with the two fan assembly securing
posts. See Figure 3-11.
2
Lower the fan assembly until the release levers snap onto the securing
posts.
3
Route the cables in the fan assembly cable tray. See Figure 3-11.
4
Reconnect the hard drive 1 data cable to the hard drive. See Figure 3-11.
1 release levers (2) 2 power cable 3 securing posts (2)
4 hard drive 1 data cable 5 cable tray
3
5
2
4
1
book.book Page 70 Thursday, August 30, 2007 3:30 PM
To Next Page
Loading...
Need help?
General