Dell Studio XPS 8100 User Manual

Back to Contents Page
 Power Button Module
Dell™StudioXPS™8100ServiceManual
Removing the Power Button Module
Replacing the Power Button Module




Removing the Power Button Module

1. Follow the procedures in Before You Begin.

2. Remove the computer cover (see Removing the Computer Cover).

3. Remove the front bezel (see Removing the Front Bezel).

4. Remove the optical drive (see Removing the Optical Drive).

5. Remove the top cover (see Removing the Top Cover).

6. Disconnect the power button module cable from the system board connector FP1 (see System Board Components).

7. Press the power button module tabs to release them from the top panel and lift the power button module.

8. Set the power button module aside in a secure location.
Replacing the Power Button Module

WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
WARNING: To guard against electrical shock, always unplug your computer from the electrical outlet before removing the cover.
WARNING: Do not operate your computer with any cover(s) (including computer covers, bezels, filler brackets, front-panel inserts, etc.)
removed.
CAUTION: Onlyacertifiedservicetechnicianshouldperformrepairsonyourcomputer.DamageduetoservicingthatisnotauthorizedbyDell™
is not covered by your warranty.
1
cable
2
power button module
3
slot
4
power button module tabs (4)

Dell Studio XPS 8100 Specifications

General

Brand	Dell
Model	Studio XPS 8100
Category	Desktop
Language	English