Regulatory compliance
The following table lists the regulatory compliance of your OptiPlex Micro Plus 7010.
Table 22. Regulatory compliance
Regulatory compliance
Product Safety, EMC and Environmental Datasheets
Dell Regulatory Compliance Home page
Dell and the Environment
Operating and storage environment
This table lists the operating and storage specifications of your OptiPlex Micro Plus 7010.
Airborne contaminant level: G1 as defined by ISA-S71.04-1985
Table 23. Computer environment
Description Operating Storage
Temperature range
10°C to 35°C (50°F to 95°F) -40°C to 65°C (-40°F to 149°F)
Relative humidity (maximum)
20% to 80% (non-condensing, Max dew
point temperature = 26°C)
5% to 95% (non-condensing, Max dew
point temperature = 33°C)
Vibration (maximum)
*
0.26 GRMS random at 5 Hz to 350 Hz 1.37 GRMS random at 5 Hz to 350 Hz
Shock (maximum)
Bottom half-sine pulse with a change in
velocity of 50.80 cm/sec (20 in./sec)
105G half-sine pulse with a change in
velocity of 133 cm/sec (52.5 in./sec)
Altitude range
-15.2 m to 3048 m (-49.87 ft to 10000
ft)
-15.2 m to 10668 m (-49.87 ft to 35000
ft)
CAUTION: Operating and storage temperature ranges may differ among components, so operating or storing
the device outside these ranges may impact the performance of specific components.
* Measured using a random vibration spectrum that simulates user environment.
† Measured using a 2 ms half-sine pulse.
22
Specifications of OptiPlex Micro Plus 7010