AH Motion Controller - Operation Manual
A-2
A.1 Installing the USB Driver for an AH Motion CPU on
Windows 7
The following example demonstrates the installation of the USB driver in Windows 7. For the installation in other operating
system, please refer to the relevant description regarding hardware installation in the operation system.
(1) Confirm AH Motion CPU is powered on normally, and AH Motion CPU is connected to the PC's USB port through
the USB cable. Make sure the USB device (CP210x USB UART Brige Controller) in the Device Manager shows a
yellow bang, which indicates that you need to install USB driver. Refer to the following installation steps.
To Next Page
Loading...
Need help?
General
