Delta AHCPU560-EN2 Series User Manual

EtherNet/IP Operation Manual
4-4
_4
6. Save and download the HWCONFIG：Click Save to save the HWCONFIG settings and then click
Download to PLC to download the file to PLC.
7. Open the EIP Builder:
7.1 Right-click the AH10EN-5A on the CPU’s main backplane and you will see the EIP Builder. Double
click it to open the EIP Builder.
7.2 Right-click the AHCPU5x1-EN on the CPU’s main backplane and you will see the EIP Builder.
Double click it to open the EIP Builder.
4.2 Set up the IP Address
This section will provide an overview of how to set up the IP address for AH10EN-5A IP and
AHCPU5x1-EN/AHCPU560-EN2. The IP address should be set up before configuring EIP related parameters
or data mapping settings.
4.2.1 IP Address Types
The AH10EN-5A series and AHCPU5x1-EN/AHCPU560-EN2 series supports 3 types of IP addressing,
BOOTP, DHCP and static IP address.
Type of IP Address
Definition
BOOTP
Via the TCP/IP Bootstrap Protocol (BOOTP) to set up the IP address, netmask and
gateway. BOOTP server may require some configuration. The Bootp protocol is designed
for a network in which each host has a permanent network connection.
DHCP
Via the Dynamic Host Configuration Protocol (DHCP) to obtain IP address, netmask,
gateway, main computer name and the WINS server automatically.

Delta AHCPU560-EN2 Series Specifications

General

Brand	Delta
Model	AHCPU560-EN2 Series
Category	Network Hardware
Language	English