Delta VFD5A5ME43ANNAA User Manual

Chapter 12 Description of Parameter SettingsME300
12.1-04-1
04 Multi-step Speed Parameters  You can set this parameter during operation.

1
st
Step Speed Frequency

2
nd
Step Speed Frequency

3
rd
Step Speed Frequency

4
th
Step Speed Frequency

5
th
Step Speed Frequency

6
th
Step Speed Frequency

7
th
Step Speed Frequency

8
th
Step Speed Frequency

9
th
Step Speed Frequency

10
th
Step Speed Frequency

11
th
Step Speed Frequency

12
th
Step Speed Frequency

13
th
Step Speed Frequency

14
th
Step Speed Frequency

15
th
Step Speed Frequency
Default: 0.00
Settings 0.00–599.00 Hz
 Use the multi-function input terminals (refer to settings 1–4 of Pr.02-01–02-05 Multi-function Input
Command) to select the multi-step speed command (the maximum is 15th step speed). Pr.04-00
to 04-14 sets the multi-step speed frequency as shown in the following diagram.
 The external terminal/digital keypad/communication controls the RUN and STOP commands with
Pr.00-21.
 You can set each multi-step speed between 0.00–599.00 Hz during operation.
 Explanation for the timing diagram of the multi-step speed and external terminals
The related parameter settings are:
1. Pr.04-00–04-14: sets the 1
st
–15
th
multi-step speed (to set the frequency of each step speed).
2. Pr.02-01–02-05: sets the multi-function input terminals (multi-step speed command 1–4).
 Related parameters:
 Pr.01-22 JOG frequency setting
 Pr.02-01 multi-function input command 1 (MI1)
 Pr.02-02 multi-function input command 2 (MI2)
 Pr.02-03 multi-function input command 3 (MI3)
 Pr.02-04 multi-function input command 4 (MI4)
 Pr.02-05 multi-function input command 4 (MI5)

Delta VFD5A5ME43ANNAA Specifications

General

Brand	Delta
Model	VFD5A5ME43ANNAA
Category	DC Drives
Language	English