ENGLISH
Getting Started
Connections Remote Control Information Troubleshooting
SpecificationsMulti-ZoneSettings
Selecting the Surround Mode
w Playing in a DENON Original
Surround Mode
Depending on the program source being played, it may not be possible
to achieve a satisfactory surround effect. In this case, try other modes
to achieve a sound field suited to your tastes.
NOTE
When the input signal is DOLBY TrueHD, DOLBY DIGITAL Plus,DTSHD
you cannot select DENON original surround mode.
The desired mode according to the program source and viewing
situation can be selected from among 7 DENON original surround
modes.
1
Select the input source by pressing
and play the source (vpage
39).
2
Press to select the Surround
mode.
5CH/7CH STEREO
： This mode is for enjoying stereo sound from all
speakers.
ROCK ARENA
： This mode is for enjoying the atmosphere of a
live concert in an arena.
JAZZ CLUB
： This mode is for enjoying the atmosphere of a
live concert in a jazz club.
MONO MOVIE
： This mode is for playing monaural movie
sources with surround sound.
z1
VIDEO GAME
： This mode is suited for achieving surround
sound with video games.
MATRIX
： This mode lets you add a sense of expansion
to stereo music sources.
VIRTUAL
： This mode is for enjoying surround effects
using only the front speakers or headphones.
z1： When playing sources recorded in monaural in the MONO
MOVIE mode, the sound will be off balance with a single
channel (left or right), so input to both channels.
e Direct Playback
In this mode the signals bypass the tone adjustment circuitry for
high quality sound.
The sound is output to the same channels as the input signal.
1
Select the input source by pressing
and play the source (vpage
39).
2
Press to select the “DIRECT”.
Displaying the currently playing surround mode
Input signal
The indication contents of
the display
Analog signal /
PCM (2ch) /
Dolby Digital source /
DTS source /
Other 2-channel digital signals
DIRECT
PCM (multi ch)
MULTI CH DIRECT
M DIRECT + PLgx CINEMA
M DIRECT + PLgx MUSIC
M DIRECT + PLgz
M DIRECT 7.1
Front
Front
Rear
Rear
Playback
r Stereo Playback
This is the mode for playing in stereo. The tone can be adjusted.
Sound is output from the front left and right speakers and
subwoofer.
1
Select the input source by pressing
and play the source (vpage
39).
2
Press to select the “STEREO”.
To cancel, press again.
The channel level and surround parameters in the PURE DIRECT
mode are the same as in the DIRECT mode.
•
•
t Playing the Pure Direct Mode
This is the mode that recreates the original sound most faithfully,
providing extremely high quality sound.
1
Select the input source by pressing
and play the source (vpage
39).
2
Press .
NOTE
When in the PURE DIRECT mode, the GUI menu is not displayed
and the display on the main unit is turned off.
Front
Front
Rear
Rear
To Next Page
Loading...
Need help?
General
Weight and Dimensions
