Denon AVR-4310 User Manual


Getting Started Connections Playback Remote ControlMulti-zone Information Troubleshooting Specifications
ENGLISH
GUI Menu Operation
Use the device selection buttons on the main remote control unit to set the device to be operated
beforehand.
When using with an iPod connected directly to the AVR-4310’s USB pot, select “USB/iPod” for the input
source.
Input sources that are not going to be used can be set ahead of time. Make this setting at “Source
Delete” (vpage 42).
To turn off the source selection menu without selecting an input source, press [SOURCE SELECT]
again.
•
•
•
•
1
Press [SOURCE SELECT].
Display the “Source Select” menu.
SOURCE SELECT
Source
DVD
Recent
Video
Player
Network
Tuner
Enter
Move
q Input Source : The name of the highlighted input source is displayed.
w Recently used sources : The recently used input sources (up to 5) are displayed.
e Icons for the input sources in the different categories are displayed.
Video :
Player :
Network :
Tuner :
(SAT/CBL), (TV), (VCR), (DVR), (V.AUX)
(HDP), (DVD), (CD), (PHONO)
(Favorites), (Internet Radio), (Media Server), (USB/iPod), (Napster)
(FM/AM)
2
Use uio p to select the input source icon, then press ENTER.
The input source is set and the source selection menu is turned off.
The currently selected input source
is highlighted.
“ ” is displayed when using
a Control dock for iPod.
Selecting the Input Source
There are three ways to select the input source, as described below.
q Selecting the input source using the Source Select menu (GUI menu)
w Selecting the input source using the [INPUT SOURCE SELECT] (Main remote control unit)
e Selecting the input source using the <SOURCE SELECT> (Main unit)
q Using the Source Select Menu
The input source can also be selected using the source selection menu.
Switch the main remote control unit to the “MAIN” or “MACRO” mode when performing this operation
(vpage 86 “Operating the Main Remote Control Unit”).
If the main remote control unit is in “ZONE2”, “ZONE3” or “ZONE4” mode, the “Source Select” menu
will not be displayed when [SOURCE SELECT] is pressed.
•
•
q
w
e
w Operating on the Main Remote Control Unit
Press [INPUT SOURCE SELECT].
The desired input source can be selected directly.
b To operate the AVR-4310 using the main remote control unit,
set the remote control unit to the “MAIN” mode (vpage
86 “Operating the Connected Devices by Remote Control
Unit”).
b Pressing the VCR/DVR button and the CD/PHONO button
on the main remote control unit will switch between the
following.
VCR/DVR :
VCR DVR
CD/PHONO :
CD PHONO
Turn <SOURCE SELECT>.
b If “ZONE2/3/ Rec Select”, “Video Select” or “Tuning Preset”
mode is selected for the input source, press <SOURCE>
before turning the <SOURCE SELECT>.
e Operating on the Main Unit
Settings

Denon AVR-4310 Specifications

General

Equalizer	Yes
Product color	Black
Impedance	8 Ω
Frequency range	10 - 100000 Hz
Audio output channels	7.1 channels
Total Harmonic Distortion (THD)	0.05 %
S-Video inputs quantity	7
Component video (YPbPr/YCbCr) in	3
Dimensions (WxDxH)	434 x 414 x 171 mm
HDMI ports quantity	6
Headphone outputs	1
Headphone connectivity	3.5 mm
S-Video outputs quantity	2
Power consumption (standby)	1 W
Power consumption (typical)	780 W

Weight and Dimensions

Weight	15800 g