EasyManuals Logo
Home>Denon>Receiver>AVR-X520BT

Denon AVR-X520BT User Manual

Denon AVR-X520BT
127 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #102 background imageLoading...
Page #102 background image
o
No video is shown on the TV
Symptom Cause / Solution Page
No picture appears.
0
Check the connections for all devices. 26
0
Insert connection cables all the way in.
0
Check that input connectors and output connectors are not reversely connected.
0
Check cables for damage.
0
Match the input settings to the input connector of the TV connected to this unit. 78
0
Check that the proper input source is selected. 37
0
Check the video input connector setting. 78
0
Check that the resolution of the player corresponds to that of the TV.
0
Check whether the TV is compatible with copyright protection (HDCP). If connected to a device not
compatible with HDCP, video will not be output correctly.
108
No video is shown on the
TV with the DVI-D
connection.
0
With the DVI-D connection, on some device combinations, devices may not function properly due to the
copy guard copyright protection (HDCP).
108
While the menu is being
displayed, no video is
shown on the TV.
0
The video being played will not appear in the background of the menu when the menu is operated during
playback of the following video signals.
- Some images of 3D video content
- Computer resolution images (example: VGA)
- Video with an aspect ratio other than 16:9 or 4:3
- Dedicated 4K connector (Blu-ray, Game)
Contents Connections Playback Settings Tips Appendix
102
Front panel Display Rear panel Remote Index

Table of Contents

Other manuals for Denon AVR-X520BT

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Denon AVR-X520BT and is the answer not in the manual?

Denon AVR-X520BT Specifications

General IconGeneral
Receiver typeSurround
Frequency range10 - 100000 Hz
Input sensitivity200 mV
Pre-out connectivityYes
Audio output channels5.1 channels
Signal-to-Noise Ratio (SNR)98 dB
Power output per channel (1KHz@6 Ohm)90 W
Power output per channel (20-20KHz@8 Ohm)70 W
HDMI in5
Composite video in2
USB ports quantity1
Digital audio coaxial in-
Connectivity technologyWired
Speakers connectivity typeClamp terminals
Ethernet LANNo
AM band range552 - 1611 kHz
FM band range87.5 - 107.9 MHz
Supported radio bandsAM, FM
Product colorBlack
Audio decodersDolby TrueHD, DTS 96/24, DTS-HD, DTS-HD Master Audio
AC input voltage230 V
AC input frequency50 Hz
Power consumption (standby)0.3 W
Power consumption (typical)330 W
Weight and Dimensions IconWeight and Dimensions
Depth319 mm
Width434 mm
Height151 mm
Weight7500 g

Related product manuals