Denon AVR-X520BT User Manual

Video
Make video-related settings.
HDMI Audio Out
Select HDMI audio output device.
AVR
(Default):
Play back through speakers connected to the
unit.
TV: Play back through TV connected to the unit.
When the power of this unit is on and “HDMI Audio Out” is set to “TV”, audio is output
as 2-channel from the HDMI OUT connector.
HDMI PassThrough
Selects how this unit will transmit HDMI signals to the HDMI output in
standby power mode.
On
(Default):
Transmits the selected HDMI input through
the AV receiver’s HDMI output when this unit
is in standby power mode.
Off:
No HDMI signals are transmitted through this
unit’s HDMI output in standby power mode.
NOTE
When “HDMI PassThrough” is set to “On”, the unit consumes more standby power. If
you are not using this unit for an extended period, it is recommended that you unplug
the power cord from the power outlet.
Contents Connections Playback Settings Tips Appendix
76
Front panel Display Rear panel Remote Index

Denon AVR-X520BT Specifications

General

Receiver type	Surround
Frequency range	10 - 100000 Hz
Input sensitivity	200 mV
Pre-out connectivity	Yes
Audio output channels	5.1 channels
Signal-to-Noise Ratio (SNR)	98 dB
Power output per channel (1KHz@6 Ohm)	90 W
Power output per channel (20-20KHz@8 Ohm)	70 W
HDMI in	5
Composite video in	2
USB ports quantity	1
Digital audio coaxial in	-
Connectivity technology	Wired
Speakers connectivity type	Clamp terminals
Ethernet LAN	No
AM band range	552 - 1611 kHz
FM band range	87.5 - 107.9 MHz
Supported radio bands	AM, FM
Product color	Black
Audio decoders	Dolby TrueHD, DTS 96/24, DTS-HD, DTS-HD Master Audio
AC input voltage	230 V
AC input frequency	50 Hz
Power consumption (standby)	0.3 W
Power consumption (typical)	330 W

Weight and Dimensions

Depth	319 mm
Width	434 mm
Height	151 mm
Weight	7500 g