Denon AVR-X520BT User Manual

o
Contents
Tips
I want the volume not to become too loud by mistake 94
I want to keep the volume at the same level when I turn the power on 94
I want to have the subwoofer always output audio 94
I want to set the optimized listening environment after changing the
configuration/position of the speakers or changing a speaker to a new
one 94
I want to combine a desired video with the current music 94
Troubleshooting
Power does not turn on / Power is turned off 96
Operations cannot be performed through the remote control unit 97
Display on this unit shows nothing 97
No sound comes out 98
Desired sound does not come out 99
Sound is interrupted or noise occurs 101
No video is shown on the TV 102
The menu screen is not displayed on the TV 103
USB memory devices cannot be played back 104
File names on the USB memory device are not displayed properly 105
Bluetooth cannot be played back 105
Contents Connections Playback Settings Tips Appendix
Tips
93
Front panel Display Rear panel Remote Index

Denon AVR-X520BT Specifications

General

Receiver type	Surround
Frequency range	10 - 100000 Hz
Input sensitivity	200 mV
Pre-out connectivity	Yes
Audio output channels	5.1 channels
Signal-to-Noise Ratio (SNR)	98 dB
Power output per channel (1KHz@6 Ohm)	90 W
Power output per channel (20-20KHz@8 Ohm)	70 W
HDMI in	5
Composite video in	2
USB ports quantity	1
Digital audio coaxial in	-
Connectivity technology	Wired
Speakers connectivity type	Clamp terminals
Ethernet LAN	No
AM band range	552 - 1611 kHz
FM band range	87.5 - 107.9 MHz
Supported radio bands	AM, FM
Product color	Black
Audio decoders	Dolby TrueHD, DTS 96/24, DTS-HD, DTS-HD Master Audio
AC input voltage	230 V
AC input frequency	50 Hz
Power consumption (standby)	0.3 W
Power consumption (typical)	330 W

Weight and Dimensions

Depth	319 mm
Width	434 mm
Height	151 mm
Weight	7500 g