EasyManuals Logo
Home>Denon>Receiver>AVR-X520BT

Denon AVR-X520BT User Manual

Denon AVR-X520BT
127 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #28 background imageLoading...
Page #28 background image
Connecting a playback device
This unit is equipped with two types of video input connectors (HDMI and composite video) and three types of audio input connectors (HDMI, digital audio
and audio).
Select input connectors on this unit according to the connectors equipped on the device you want to connect.
If the device connected to this unit is equipped with an HDMI connector, it is recommended to use HDMI connections.
In the HDMI connection, audio and video signals can be transmitted through a single HDMI cable.
0
“Connecting a DVD player or Blu-ray Disc player” (v p. 29)
0
“Connecting a set-top box (Satellite tuner/cable TV)” (v p. 30)
0
“Connecting a video camcorder or game console” (v p. 31)
0
Connect devices to this unit as indicated by the input sources printed on the audio/video input connectors of this unit.
0
The source that is assigned to the HDMI IN, DIGITAL AUDIO IN, VIDEO IN and AUDIO IN connectors can be changed. See “Input Assign” (v
p. 78) on how to change the
input source assigned to the input connectors.
0
To play back audio signals that are input to this unit on a TV connected via HDMI, set “HDMI Audio Out” (v p. 76) to “TV”.
Contents
Connections Playback Settings Tips Appendix
28
Front panel Display Rear panel Remote Index

Table of Contents

Other manuals for Denon AVR-X520BT

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Denon AVR-X520BT and is the answer not in the manual?

Denon AVR-X520BT Specifications

General IconGeneral
Receiver typeSurround
Frequency range10 - 100000 Hz
Input sensitivity200 mV
Pre-out connectivityYes
Audio output channels5.1 channels
Signal-to-Noise Ratio (SNR)98 dB
Power output per channel (1KHz@6 Ohm)90 W
Power output per channel (20-20KHz@8 Ohm)70 W
HDMI in5
Composite video in2
USB ports quantity1
Digital audio coaxial in-
Connectivity technologyWired
Speakers connectivity typeClamp terminals
Ethernet LANNo
AM band range552 - 1611 kHz
FM band range87.5 - 107.9 MHz
Supported radio bandsAM, FM
Product colorBlack
Audio decodersDolby TrueHD, DTS 96/24, DTS-HD, DTS-HD Master Audio
AC input voltage230 V
AC input frequency50 Hz
Power consumption (standby)0.3 W
Power consumption (typical)330 W
Weight and Dimensions IconWeight and Dimensions
Depth319 mm
Width434 mm
Height151 mm
Weight7500 g

Related product manuals