EasyManuals Logo
Home>Denon>Receiver>AVR-X520BT

Denon AVR-X520BT User Manual

Denon AVR-X520BT
127 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #98 background imageLoading...
Page #98 background image
o
No sound comes out
Symptom Cause / Solution Page
No sound comes out of
speakers.
0
Check the connections for all devices. 22
0
Insert connection cables all the way in.
0
Check that input connectors and output connectors are not reversely connected.
0
Check cables for damage.
0
Check that speaker cables are properly connected.Check that cable core wires come in contact with the
metal part on speaker terminals.
22
0
Securely tighten the speaker terminals. Check speaker terminals for looseness. 22
0
Check that a proper input source is selected. 37
0
Adjust the volume. 38
0
Cancel the mute mode. 38
0
Check the digital audio input connector setting. 78
0
Check the digital audio output setting on the connected device. On some devices, the digital audio output
is set to off by default.
0
When a headphone is plugged into the PHONES jack on the main unit, sound is not output from the
speaker terminal and SUBWOOFER connector.
12
No sound comes out when
using the DVI-D
connection.
0
When this unit is connected to a device equipped with a DVI-D connector, no sound is output. Make a
separate audio connection.
Contents Connections Playback Settings Tips Appendix
98
Front panel Display Rear panel Remote Index

Table of Contents

Other manuals for Denon AVR-X520BT

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Denon AVR-X520BT and is the answer not in the manual?

Denon AVR-X520BT Specifications

General IconGeneral
Receiver typeSurround
Frequency range10 - 100000 Hz
Input sensitivity200 mV
Pre-out connectivityYes
Audio output channels5.1 channels
Signal-to-Noise Ratio (SNR)98 dB
Power output per channel (1KHz@6 Ohm)90 W
Power output per channel (20-20KHz@8 Ohm)70 W
HDMI in5
Composite video in2
USB ports quantity1
Digital audio coaxial in-
Connectivity technologyWired
Speakers connectivity typeClamp terminals
Ethernet LANNo
AM band range552 - 1611 kHz
FM band range87.5 - 107.9 MHz
Supported radio bandsAM, FM
Product colorBlack
Audio decodersDolby TrueHD, DTS 96/24, DTS-HD, DTS-HD Master Audio
AC input voltage230 V
AC input frequency50 Hz
Power consumption (standby)0.3 W
Power consumption (typical)330 W
Weight and Dimensions IconWeight and Dimensions
Depth319 mm
Width434 mm
Height151 mm
Weight7500 g

Related product manuals