Denon AVR-X520BT User Manual

Features
High quality sound
0
With discrete circuit technology, the power amplifier provides
identical quality for all 5-channels (90 Watts x 5-channels)
For optimum realism and stunning dynamic range, the power amplifier
section features discrete power devices (not integrated circuitry).
By using high current, high power discrete power devices, the amplifier
is able to easily drive high quality speakers.
High performance
0
4K 60Hz input/output supported
.
4K 60p
4:4:4
4K 60p
4:4:4
When 4K Ultra HD (High Definition) is used, an input/output speed of 60
frames per second (60p) is achieved for video signals. When connected
to 4K Ultra HD and 60p video signal input compatible TV, you can enjoy
the sense of realism only available from high-definition images, even
when viewing fast-moving video.
This unit also supports image processing for 4K 60p, 4:4:4 and 24-bit
videos. By processing the video at the original resolution, this unit lets
you enjoy flawless, high-definition picture quality.
Contents
Connections Playback Settings Tips Appendix
7
Front panel Display Rear panel Remote Index

Denon AVR-X520BT Specifications

General

Receiver type	Surround
Frequency range	10 - 100000 Hz
Input sensitivity	200 mV
Pre-out connectivity	Yes
Audio output channels	5.1 channels
Signal-to-Noise Ratio (SNR)	98 dB
Power output per channel (1KHz@6 Ohm)	90 W
Power output per channel (20-20KHz@8 Ohm)	70 W
HDMI in	5
Composite video in	2
USB ports quantity	1
Digital audio coaxial in	-
Connectivity technology	Wired
Speakers connectivity type	Clamp terminals
Ethernet LAN	No
AM band range	552 - 1611 kHz
FM band range	87.5 - 107.9 MHz
Supported radio bands	AM, FM
Product color	Black
Audio decoders	Dolby TrueHD, DTS 96/24, DTS-HD, DTS-HD Master Audio
AC input voltage	230 V
AC input frequency	50 Hz
Power consumption (standby)	0.3 W
Power consumption (typical)	330 W

Weight and Dimensions

Depth	319 mm
Width	434 mm
Height	151 mm
Weight	7500 g

Summary

Features

High Quality Sound

High Performance

Easy Operation

Setup Assistant Guidance

Remote Control Unit

Remote Control Buttons: Operation and Navigation

Remote Control Buttons: Tuning and Settings

Connections Guide

Connecting Speakers

Guides placement of front, center, surround speakers, and subwoofer.

Speaker Connection

Explains how to connect speaker cables to the terminals.

Connecting the Subwoofer

Connecting a TV

How to connect the unit to a TV for video and audio output.

Connecting Playback Devices

Connects DVD/Blu-ray players, set-top boxes, camcorders, and game consoles.

Connecting USB Devices

Instructions for connecting USB memory devices.

Connecting Antennas

Connecting the Power Cord

Playback

Basic Operation

Turning power on, selecting input source, adjusting volume, muting.

Playing Audio Sources

Playing music from USB memory devices and Bluetooth devices.

Radio Reception

Settings

Menu Navigation and Audio Setup

Navigating menus and adjusting audio parameters like Surr.Parameter, EQ, Restorer.

Speaker Setup and Calibration

Performing Auto Setup or Manual Setup for speakers and room acoustics.

Troubleshooting

Power and Remote Issues

Solutions for power not turning on, auto-off, or remote control malfunctions.

Sound and Video Output Issues

Troubleshooting no sound, distorted sound, no video, or menu display problems.

Device Playback and Connectivity Issues

Solutions for USB memory device and Bluetooth playback and connection errors.