Denon AVR-X520BT User Manual

Sound modes and channel output
S This indicates the audio output channels or surround parameters that can be set.
D This indicates the audio output channels. The output channels depend on the settings of “Speaker Config.”. (v
p. 85)
Sound mode
(v p. 58)
Channel output
Front L/R Center Surround L/R Subwoofer
Direct (2-channel)
S
D
z
Direct (Multi-channel)
S D D D
Stereo
S D
Multi Ch In
S D D D
Dolby Pro Logic g S D D D
DTS Neo:6
S D D D
Dolby Digital
S D D D
Dolby Digital Plus
S D D D
Dolby TrueHD
S D D D
DTS Surround
S D D D
DTS 96/24
S D D D
DTS-HD
S D D D
DTS Express
S D D D
Multi Ch Stereo
S D D D
Virtual
S D
zAudio is output when “Subwoofer Mode” in the menu is set to “LFE+Main”. (v p. 88)
Contents
Connections Playback Settings Tips Appendix
112
Front panel Display Rear panel Remote Index

Denon AVR-X520BT Specifications

General

Receiver type	Surround
Frequency range	10 - 100000 Hz
Input sensitivity	200 mV
Pre-out connectivity	Yes
Audio output channels	5.1 channels
Signal-to-Noise Ratio (SNR)	98 dB
Power output per channel (1KHz@6 Ohm)	90 W
Power output per channel (20-20KHz@8 Ohm)	70 W
HDMI in	5
Composite video in	2
USB ports quantity	1
Digital audio coaxial in	-
Connectivity technology	Wired
Speakers connectivity type	Clamp terminals
Ethernet LAN	No
AM band range	552 - 1611 kHz
FM band range	87.5 - 107.9 MHz
Supported radio bands	AM, FM
Product color	Black
Audio decoders	Dolby TrueHD, DTS 96/24, DTS-HD, DTS-HD Master Audio
AC input voltage	230 V
AC input frequency	50 Hz
Power consumption (standby)	0.3 W
Power consumption (typical)	330 W

Weight and Dimensions

Depth	319 mm
Width	434 mm
Height	151 mm
Weight	7500 g