EasyManuals Logo
Home>Denon>Home Theater System>DHT-FS3

Denon DHT-FS3 User Manual

Denon DHT-FS3
28 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #10 background imageLoading...
Page #10 background image
ENGLISH
Getting Started Connections Settings Operation Other functions
Operating the
remote control unit
Troubleshooting Specifications
Installation
About front speaker unit installation
Select one of the two ways of installing the speaker unit.
Mount the feet in the screw holes in the unit’s bottom panel.
Two types of feet (
0.08 ft / 25 mm or 0.11 ft / 35 mm) are included. Select the type best suited for the
place of installation.
Use the included screws to securely fasten the DHT-FS3 to the two included wall mount fittings.
Horizontally
Mounting on a wall
When using screw type
feet, the base of flat TV can
be placed in the spaces
on the bottom of the DHT-
FS3.
b Depending on the TV’s
shape, it may not be
possible to install as
shown in the picture.
b Be careful that the DHT-
FS3 does not obstruct
the TV’s remote control
sensor.
<View from the side>
Front speaker unit
TV’s base
Fitting driven
into wall
Screw
Fitting
2.3 ft / 690 mm
2.4 ft /
720 mm
1.7 ft / 510 mm
About subwoofer installation
Use the included stand to install the subwoofer as shown in the picture.
Included stands
Subwoofer
Vertical installation
NOTE:
Be sure to mount the same type of feet in all
four holes so that the unit remains level.
CAUTION:
For safety, do not place any objects on top of
or lean any objects against the DHT-FS3.
To ensure safety, have a specialist mount the
unit on the wall.
Be sure to fasten the connection cable to
the wall to prevent getting your hands or feet
caught, causing the DHT-FS3 to fall.
Be sure to check for safety directly after
mounting the unit on the wall. Afterwards,
inspect periodically to be sure there is no
possibility the unit will fall. Note that DENON
will accept no responsibility whatsoever for
accidents caused by improper selection of the
place of installation or poor installation.
For the apparatus mounted to wall, the
apparatus shall be installed on solid wood,
bricks, concrete or solid wood columns and
battens.
NOTE:
If there is a magnet or an object generating
magnetism nearby, interaction with the DHT-
FS3 could cause color blotching on the TV.
ENGLISH
Installation

Other manuals for Denon DHT-FS3

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Denon DHT-FS3 and is the answer not in the manual?

Denon DHT-FS3 Specifications

General IconGeneral
Audio decodersDolby Digital, Dolby Pro Logic II, DTS
RMS rated power110 W
Audio output channels5.1 channels
Signal-to-Noise Ratio (SNR)100 dB
Satellite speaker frequency range150 - 20000 Hz
Subwoofer frequency range45 - 150 Hz
Subwoofer driver diameter (imperial)6.23 \
Power consumption (standby)1 W
Power consumption (typical)32 W
Weight and Dimensions IconWeight and Dimensions
Subwoofer weight5600 g
Center speaker weight4600 g
Subwoofer dimensions (WxDxH)380 x 360 x 106 mm
Center speaker dimensions (WxDxH)96 x 125 x 850 mm

Related product manuals