EasyManuals Logo
Home>Dexter Laundry>Washer>O Series

Dexter Laundry O Series User Manual

Dexter Laundry O Series
340 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #21 background imageLoading...
Page #21 background image
21
8514-300-001 REV PR
If an elevated concrete pedestal is desired, it should be embedded and tied into the existing
floor. DO NOT install a pad on top of the existing floor. Cut through existing floor as shown
below. See Machine Mounting Detail Figures for floor thickness and bolt sizes.
WARNING
EXPANSION ANCHORS ARE NOT
RECOMMENDED FOR USE IN CONCRETE
PEDESTALS, BECAUSE THE ANCHORS
ARE TOO CLOSE TO AN EDGE, CAUSING
IT TO BREAK OUT.
7.1.3 Foundaon and Pad Opons
All installations require reinforced concrete floors. Refer to appropriate model Machine Mounting
Detail Figures 1-1, 1-2 and 1-3 for minimum floor thickness and minimum pad sizes. See
mounting diagram for overall washer dimensions.
Refer to appropriate model Figure 1-4 for side-by-side mounting dimensions in Machine
Mounting Details.
Figure 7-1 Washer Installaon on Exisng Floor
Figure 7-2 Washer Installaon on New Floor

Table of Contents

Other manuals for Dexter Laundry O Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Dexter Laundry O Series and is the answer not in the manual?

Dexter Laundry O Series Specifications

General IconGeneral
BrandDexter Laundry
ModelO Series
CategoryWasher
LanguageEnglish

Related product manuals