Dexter Laundry O Series User Manual

74
8514-300-001 REV PR
Figure 7-44 Top Level Oponal Cycles Menu
7.4.3 Vended Washer Error Codes
The last fifteen occurring error codes will be stored in the control with a time and date stamp.
The purpose of this option is only to observe the history of these code occurrences (no changes
can be made).
The time is based off the Real Time Clock, but potentially shifted by the user’s manual
programming changes (Shift Hours option) and/or network time override. As additional error
codes occur, the oldest of the fifteen logged codes is cleared from memory.
7.4.4 Prices
This option allows the user to set values for coin acceptor inputs and to set the vend price. It
also allows the user to return the values to factory defaults. After changing prices using the
“Up” or “Down” buttons, the “Enter” button must be pressed again for the control to store the
changes that have been made.
1. “RIGHT COIN” and “LEFT COIN” are the two possible inputs from coin acceptors.
2. “SET VEND” is the actual Base Vend Price (or Vend Price A) that is shown on the control
display.
To reset either the coin acceptor inputs or the vend price to factory default, press “Enter” when
the “DEFAULT” prompt is shown. Press “Enter” again when the “RESET” prompt is shown to
confirm the action.
Figure 7-45 Top Level Prices Menu

Dexter Laundry O Series Specifications

General

Brand	Dexter Laundry
Model	O Series
Category	Washer
Language	English