Dexter Laundry T-350 User Manual

62
8514-300-001 REV PR
7.1.13 Operaon Check
After all mounting, plumbing and electrical work is completed, run the machine through a
complete wash cycle. Check for water leaks and verify proper operation.
During intermediate spin and final spin, the cylinder should turn in a counterclockwise
direction when viewed from the front of the machine. If spin is clockwise, the T1 and T2 motor
wires connecting to terminal T1 and T2 on the variable frequency drive should be swapped.
Remove power to the machine before opening service panels and swapping wires.
WARNING
FIRE HAZARD! TO AVOID
POTENTIAL RISKS OF
SPONTANEOUS
COMBUSTION OF A LOAD,
REMOVE THE LOAD
QUICKLY AFTER THE
COMPLETION OF THE
CYCLE OR IN CASE OF
FAILURE OF POWER
SUPPLY.
INFORMATION
The washer does not emit hazardous
radiation.
WARNING
EXPLOSION HAZARD! DO
NOT WASH LOADS WHICH
MAY CREATE AN
EXPLOSIVE ATMOSPHERE
IN THE WASHER.
INFORMATION
The A-weighted emission sound pressure level
does not exceed 70dB(A). The operator does
not need hearing protection.

Dexter Laundry T-350 Specifications

General

Brand	Dexter Laundry
Model	T-350
Category	Washer
Language	English