9
8514-300-001 REV PR
2 Safety Symbol Meaning
“DO NOT” WARNING SYMBOLS
Meaning: Do Not Play In Or Around This
Equipment
Meaning: Do Not Step, Stand, or Sit on
This Equipment or Its Components.
Meaning: Do Not Operate with Guards or
Covers Removed. Used When Covering
Moving Hazards.
Meaning: Do Not Touch Output Wires on
Controls Transformer
Meaning: Do Not Operate with Guards or
Covers Removed. Used When Covering
Non-Moving Hazards.
Table 2-1 DO NOT Warning Symbols
WARNING AND DANGER SYMBOLS
Meaning: General caution and special
attention is needed.
Meaning: There are sharp edges on various
sheet metal parts internal to the enclosure.
Use safety consciousness when placing or
moving your hands while working in the
interior of this equipment.
Meaning: High Voltage. Disconnect power
before servicing.
Meaning: Do Not Wash Items Containing
Flammable Material.
Meaning: Do not touch door glass or soap
compartments. Allow these parts to cool before
servicing. Do not supply inlet water > 82°c to
the water inlet valve to reduce the risk of
damage.
Meaning: Do Not Wash Items Containing
Explosive Material.
Meaning: Do Not Operate in Any
Hazardous Classified (ATEX) Environment.
Meaning: Do Not Operate if Door Glass is
Damaged in Any Way.
Meaning: Replace fuses with the same
type and rating.
Table 2-2 Warning and Danger Symbols