Digi ConnectCore Hardware Reference Manual

About the development board HDMI interface
ConnectCore for i.MX51 Hardware Reference Manual
85
HDMI interface
The development board provides an HDMI interface connected to the display interface 1 of the
ConnectCore for i.MX51 CPU. An Analog Devices AD9389 HDMI transmitter is used in the development
board. This HDMI transmitter is controlled through the I
2
C port 2 of the ConnectCore for i.MX51.
The I
2
C device address of the HDMI transmitter is the following:
Interface
I
2
C Address (7 bits)
HDMI transmitter (AD9389)2 0 x 39
HDMI connector, J19
The development board provides an HDMI connector, J19. The HDMI interface is connected to the
Display 1 interface of the ConnectCore for i.MX51 CPU.
The table below shows the pinout of the HDMI connector:

Digi ConnectCore Specifications

General

Brand	Digi
Model	ConnectCore
Category	Control Unit
Language	English