Digi ConnectCore Hardware Reference Manual

About the development board Module connectors and signal rails
ConnectCore for i.MX51 Hardware Reference Manual
97
Module connectors and signal rails
Module connectors
See the Module pinout for related information.
Signal rails, J25 and J26
The development board provides two 2x80 pin signal rails, J25 and J26. These connectors provide
most of the signals available on the module connectors and can be used for measurement or
development purposes.
n J25 corresponds to module connector J1
n J26 corresponds to module connector J2

Digi ConnectCore Specifications

General

Brand	Digi
Model	ConnectCore
Category	Control Unit
Language	English