ConnectCore for i.MX51
©2011DigiInternational,Inc. 102
Power-Over-Ethernet (PoE) - IEEE802.3af
The development board provides two PoE module connectors, P17 and P18, to plug a Digi PoE
module (DG-ACC-POE). The PoE module is an optional accessory item that can be plugged on
the development board through the two connectors.
P17, input connector: provides access to the PoE signals from the Ethernet connector
P18, output connector: provides the output power supply from the PoE module
PoE Header, P18 PoE Header, P17
Downloaded from Elcodis.com electronic components distributor
To Next Page
Loading...
Need help?
General
