Name: Digi ConnectCore
Brand: Digi
Rating: 5 (1 reviews)

To Next Page

To Previous Page

ConnectCore for i.MX51

©2011DigiInternational,Inc. 22

J2 Pinout

173 GPOIO18 EIM_EB0 i.MX51: EIM_EB0 Not used

174 GPOIO18 EIM_RW# i.MX51: EIM_RW

ETH_CTRL: WR#

Peripheral Application Read /

Write

175 GPOIO18 EIM_EB1 i.MX51: EIM_EB1 Not used

176 GPOIO18 EIM_CRE/GPIO3_2 i.MX51: EIM_CRE Peripheral Application Interrupt

input

177 GPOIO18 EIM_EB2/GPIO2_22/

TRCTL/FEC_MDIO/

SISG2/CSI1_D2/

AUD5_RXFS/CMPOUT1

i.MX51: EIM_EB2 Peripheral Application Byte

Enable 2

178 GPOIO18 EIM_WAIT i.MX51: EIM_WAIT Not used

179 GPOIO18 EIM_EB3/GPIO2_23/

TRCLK/FEC_RDATA1/

SISG3/CSI1_D3/

AUD5_RXC/CMPOUT2

i.MX51: EIM_EB3 Peripheral Application Byte

Enable 3

180 GPOIO18 EIM_BCLK i.MX51: EIM_BCLK Peripheral Application Clock Burst By default not connected on

Development Board.

Pin Type Signal name Use on module Use on development board Comments

1 HSGPIO27 DISP1_DAT0 i.MX51: DISP1_DAT0 HDMI, VGA and LCD1 Data

2 HSGPIO27 DISP1_DAT1 i.MX51: DISP1_DAT1 HDMI, VGA and LCD1 Data

3 HSGPIO27 DISP1_DAT2 i.MX51: DISP1_DAT2 HDMI, VGA and LCD1 Data

4 HSGPIO27 DISP1_DAT3 i.MX51: DISP1_DAT3 HDMI, VGA and LCD1 Data

5 HSGPIO27 DISP1_DAT4 i.MX51: DISP1_DAT4 HDMI, VGA and LCD1 Data

6 HSGPIO27 DISP1_DAT5 i.MX51: DISP1_DAT5 HDMI, VGA and LCD1 Data

7 GPIO27 DISP1_DAT6 i.MX51: DISP1_DAT6 HDMI, VGA and LCD1 Data, Boot

Configuration

8 GPIO27 DISP1_DAT7 i.MX51: DISP1_DAT7 HDMI, VGA and LCD1 Data, Boot

Configuration

Pin I/O Type Signal name Use on module Use on development board Comments

Downloaded from Elcodis.com electronic components distributor

Digi ConnectCore User Manual

Other manuals for Digi ConnectCore