Command descriptions set samba
ConnectPort® LTS Command Reference
104
set samba
Purpose
Configures and displays Samba service settings.
Required permissions
Permissions must be set to one of the following:
n For a user to display the Samba settings: “set permissions s-service=read”
n For a user to display and set the Samba settings:
“set permissions s-service=rw”
Syntax
Configure Samba settings
set samba [state={off|on}]
[server={
hostname
|
ip address
}]
[path=
path
]
[timeout=5-3600]
[interval=5-3600]
[user=
username
]
[password=
password
]
[alert state={off|on}]
[alert description=
string
]
[alert priority={normal|high}]
[alert type={email|snmptrap|all}]
[alert subject=
string
]
[alert to=
email address
]
[alert
cc=email address
]
Display current settings
set samba
Options
state={off|on}
Specifies whether the Samba service will be enabled
on
Enable the Samba service.
off
Disable the Samba service.
Default is off.
server={hostname|ip address}
To Next Page
Loading...
Need help?
General