Command descriptions revert
ConnectPort® LTS Command Reference
44
revert
Purpose
Reverts all or a subset of a devices’ configuration settings to their default values. If you enter “revert
user,” “revert group,” or “revert permissions,” a message is displayed indicating that those settings
cannot be reverted individually, and instead must be reverted all together at the same time via the
“revert auth” command. The “revert auth” command (revert authentication and authorization)
reverts all users, all groups, and all permissions at the same time.
Required permissions
No “set permissions” option is required for “revert” command variants except “revert all.” The
permissions used by the various “set” commands apply to the various “revert” command variants.
“revert all” uses a different mechanism that bypasses the individual “set” commands, and therefore
has its own permissions. To execute the “revert all” command, a user must have permissions set to
“set permissions revert-all=execute”. See "set permissions" for details on setting user permissions
for commands.
Syntax
revert [all|
alarm|
auth [uid=
range
][gid=
range
]|
autoconnect [port=
range
]|
buffer [port=
range
]|
host|
lcd|
modem [port=
range
]|
network|
nfs|
pmodem [port=
range
]|
portauth [port=
range
]
portgroup|
ppp|
profile [port=
range
]|
python|
realport|
rtstoggle [port=
rtstoggle
]|
samba|
sdmemory|
serial [port=
range
]|
serialport [port=
range
]
service|
smtp|
snmp|
socket_tunnel|
switches [port=
range
]|
sysauth|
syslog|
system|
tcpserial [port=
range
]|
To Next Page
Loading...
Need help?
General