Command descriptions info
ConnectPort® LTS Command Reference
31
info
Purpose
Displays statistical information about a device.
The “info” command displays statistical information about a device over time. In contrast, the
“display” command’s focus is on real-time information, while the “status” command displays the
status of outgoing connections (connections made by “connect,” “rlogin,” or “telnet” commands).
Command options allow display of the following categories of statistics:
n Device statistics
n Ethernet statistics
n ICMP statistics
n IP statistics
n Serial statistics
n TCP statistics
n UDP statistics
n Zigbee statistics
The statistics in these tables are those gathered since the tables were last cleared. The statistics
tables are cleared by rebooting the ConnectPort LTS product.
Syntax
info {device|ethernet|icmp|ip|serial|tcp|
udp|zigbee_sockets}
Options
For a description of the statistics displayed by all these options see the statistics tables in the
“Output” section of this description.
device
Displays statistics from the device table. This information includes device-model information, MAC
address, current Bios and firmware, memory usage, utilization, and uptime. The information displayed
by this option is the same as that displayed by the “display device” command (see "display").
For models with dual power supplies, such as ConnectPort LTS 16 MEI 2AC, this command displays the
status of the power supplies (“Normal” or “Fail.”).
ethernet
Displays statistics from the Ethernet table.
icmp
Displays statistics from the ICMP table.
ip
Displays statistics from the IP table.
serial
To Next Page
Loading...
Need help?
General