Digi ConnectPort LTS8 Command Reference

Introduction Configure an IP address
ConnectPort® LTS Command Reference
9
2. A login prompt is displayed. If you do not know the user name and password for the device,
contact the system administrator who configured the device. The default username is “root”
and the default password is “dbps.”
3. If the system interface access option of the user is set as “Shell”, the bash-shell can be
accessed after authentication is passed. To access configuration-shell from the bash-shell,
enter following command on the bash-shell.
configshell
If the system interface access option of the user is set as “CLI menu”, the configuration-shell
can be accessed directly after authentication is passed. For details on configuring the system
interface access option, see the Digi product’s User’s Guide or the “set user” command.
Configure an IP address
If the device to which you will be issuing commands has not already been assigned an IP address, or if
the IP address needs to be modified from its initial configuration, see the Digi product’s User’s Guide
for details on configuring an IP address.

Digi ConnectPort LTS8 Specifications

General

Brand	Digi
Model	ConnectPort LTS8
Category	Server
Language	English