Pitch Shifter.Interval choices include:
Parameter 2 (IPS) - The Number 3 knob selects the scale the IPS will use.Scale choices include:
Major (
MAJOR),Minor (MINOR), Dorian (DORIAN),Mixolydian (MIXoLYDn),Lydian
(
LYDIAN),Harmonic Minor (HARMINor).
Parameter 3 (IPS) - The Number 4 knob selects the musical key the IPS will use. Key choices range
from Key E (
KEY E) through Key Eb&(KEY Eb) .
Detuning
Detuning is similar to a standard pitch shifter with the exception that it shifts the copied signal by less
than a semitone resulting in an effect as if two guitars were slightly out of tune and playing in unison.
Parameter 1 (Detune) -The Number 2 knob selects the Amount (
AMouNT) of detuning applied to
the copied pitch in cents (100 cents equals 1 semitone).Ranges from 24
cents below (
-24) to 24 cents above (+24).
The Number 3 and 4 knobs don’t function when Detune is selected.
Pitch Shifter
A Pitch Shifter makes a copy of the incoming signal and the shifts the pitch of the copied signal and keeps
the shifted pitch at a parallel distance from the input note.
Parameter 1 (Pitch) -The Number 2 knob selects the Shift (
SHIFT) of the pitch in semitone
intervals. Ranges from two octaves below (
-24) to two octaves above (+24).
The Number 3 and 4 knobs have no function when Pitch is selected.
Level -The Number 5 knob adjusts the Level or Mix (
IPS LVL/IPS MIX)of all pitch altering effects in
this module. Ranges from 0 to 99.
Stomp Box Modeling
The GNX2 Stomp Box Modeling emulates the tones of the most popular distortion boxes ever used
including the DOD OD250,Boss DS-1,Arbiter Fuzz Face, Electro Harmonix Big Muff, ProCo RAT, DOD
Grunge, Boss Metal Zone, Ibanez TS-9,Voodoo Labs Sparkle Drive, and the Guyatone OD-2*.
*Arbiter,Boss,Electro-Harmonix,ProCo, Ibanez,Voodoo Labs,Guyatone,DS-1,Fuzz Face,Big Muff,RAT, Metal Zone,TS-9, Sparkle Drive, and
OD-2 are trademarks of their respective companies and are in no way associated with DigiTech
Stomp Box On/Off - The Status button turns the Stomp Box (Stompbox) Modeling on and off.
Stomp Box Type - The Number 1 knob selects the type of stomp box to be used.Choices include:
OCT DowN (octave down)
7TH DowN (a seventh below)
6tH DowN (a sixth below)
5tH DowN (a fifth below)
4tH DowN (a fourth below)
3RD DowN (a third below)
2ND DowN (a second below)
2ND UP (a second above)
3RD UP (a third above)
4TH UP (a fourth above)
5TH UP (a fifth above)
6TH UP (a sixth above)
7TH UP (a seventh above)
OCT UP (an octave above)
20
Effects and Parameters
To Next Page
Loading...
Need help?
General
