triangle (Triangle) - a smooth rise and fall,but abrupt turn around in oscillation.
SINE (Sine) - a smooth rise,fall, and turn around in oscillation.
SQUARE (Square) - an abrupt rise,fall, and turn around in oscillation.
8.Store your LFO assignment to your preset. See page 16 for more information on the storing proce-
dure.
Amp Footswitch
From the factory,the Amp Footswitch switches between the Green and the Red Amp Channels.However,
the GNX2 allows you to select the Amp Footswitch function.The procedure for assigning the function of
the Amp Footswitch is as follows:
1.Press either EFFECT SELECT button until the Exp Assign row is selected.
2.Press the STATUS button until the display reads
AMP FS (Amp Footswitch).
3.Rotate the Number 1 knob to select the Amp Footswitch function.Your choices include:
G-R - Switches between the Green and Red Amp Channels.
G-Y - Switches between the Green and Yellow (Warped) Channels.
R-Y - Switches between the Red and Yellow (Warped) Channels.
G-R-Y - Switches between the Green, Red,and Yellow (Warped) Channels.
4.Store your Amp Footswitch assignment to your preset.See page 16 for more information on the stor-
ing.
Expression Parameter Assignment List
The following Parameters can be assigned to the any of the 3 Expression Pedal links,LFO 1, or LFO 2.
NO LINK (No Link) - No Parameter is assigned
cmpattak (Compressor Attack) - Controls the Compressor’s Attack time.
CMPRaTiO (Compressor Ratio) - Controls the Compressor’s Ratio.
cmpthres (Compressor Threshold) - Controls the Compressor’s Threshold.
CMP GAiN (Compressor Gain) - Controls the Compressor’s Gain.
AMOUNT/SHIFT (Parameter 1) - Controls the interval for the IPS module.
WHaM PDL (Whammy™ Parameter 2) - Controls the pitch bend when Whammy™ is engaged.
KEY (IPS Parameter 3) - Controls the key type when the IPS module is engaged.
SCALE (IPS Parameter 2) - Controls the scale when the IPS module is engaged.
IPS MIX/IPS LVL (Wham/IPS Mix/Level) - Controls the wet/dry mix or Level for the IPS module.
Stompbox Effect Parameters
Screamer
drive tone level
Rodent dist filter volume
DS Dist dist tone level
DOD 250 gain level
Big MP sustain tone volume
Guy OD drive level
Sparkdrv gain tone clean volume
Grunge grnggain butt face loud
Fuzzy fuzz volume
Zone dist mid freq mid lvl low high level
AMP CHaN
(Amp Channel) - Switches Amp Channels.
Amp WARP (Amp Warp) - Warps the Green and Red Amp Models.
Cab WARP (Cabinet Warp) - Warps the Green and Red Cabinet types.
WARP (Warp) - Warps the Green and Red Channels.
38
Other Functions
To Next Page
Loading...
Need help?
General
