Doosan DE08TIS Series User Manual

2. MAJOR MAINTENANCE
26
2.3 Engine Inspection
2.3.1 Stopping engine
After checking the engine for any unusual condition at the idling speed, then turn the key switch to stop the
engine.
2.3.2 General engine inspection cycle
○ : Inspection and adjustment ● : Replacement
Check Points
Daily
Inspection interval (hours)
Remark
50
200
500
1,200
Cooling
system
Check leakage (hose, clamp)
○
Check coolant level
○
Replacement of Coolant
●
Poly-belt
○
Every
2,000
hours
Radiator cleaning
○
Lubrication
system
Leakage check
○
Oil level gauge check
○
Lubricant replacement
●
(initial)
●
[Note]
Oil filter cartridge replacement
●
(initial)
●
[Note]
Intake
System
Cooler connection check
(hose, clamp)
○
Cleaning & replacement of air
filter element
○
Cleaning
●
Fuel
System
Fuel line leakage check
○
Clean the fuel supply pump strainer
○
Remove the fuel tank precipitate
○
Discharge water from water
Separator
○
Replace fuel filter element
●
Check the fuel injection timing
○
When
required
Fuel injection nozzle check
○
When
required
Electric
System
Exhaust gas status check
○
Battery charging status check
○
Compression pressure check
○
When
required
Intake/exhaust value clearance
adjustment
○
initial
When
required
Note : Replacement cycle may vary depending on use conditions.

Doosan DE08TIS Series Specifications

General

Brand	Doosan
Model	DE08TIS Series
Category	Engine
Language	English