DL06K Interim Tire-4 Diesel Engine Disassembly and Reassembly of Major Components
54
3. Disassembly and Reassembly of Major Components
3.1. Engine Disassembly
3.1.1. General precautions
z Prepare the shelf to keep various tools, repair parts, and parts after disassembly.
z Perform the maintenance work in bright and clean place. Wash your hands when
assembling the engine.
z Keep the disassembled parts by order of disassembly. Keep the parts safely and
separately.
3.1.2. Cooling water
z Open the radiator cap and drain
cooling water by opening the drain
valve located under the radiator,
as shown in the right side figure.
CAUTION :
When opening a radiator cap while
the engine is hot, wrap the cap with
cloths and open the valve slowly,
so that internal steam pressure
goes down.
Then, the incident by hot steam
from the cap can be prevented.
z Disassemble the cooling water drain
plug of the cylinder block and oil
cooler, and drain cooling water to
the prepared container.
3.1.3. Oil level gauge
z Take out the oil level gauge.
FG000494
Radiator cap
Radiator
Drain valve
To Next Page
Loading...
Need help?
General
