06
116
Driving
Activation/Deactivation
By default, the system is automatically
activated at every engine start.
The function is activated and
deactivated in the Driving/Vehicle
menu of the touch screen.
Displays in the instrument
panel
1. Detected speed limit indication.
or
2. Indication of the end of the speed limit.
The system is active but is not detecting speed
limit information.
On detection of speed limit information, the
system displays the value.
Operating limits
The system does not take account of reduced
speed limits, especially those imposed in the
following cases:
-
atmospheric pollution,
-
when towing,
-
driving with a space-saver type spare wheel
or snow chains fitted,
-
tyre repaired using the temporary puncture
repair kit,
- young drivers.
It is possible for the system to not display the
speed limit if it does not detect a
speed limit
sign within a
preset period and in the following
situations:
- road signs that are obstructed, do not
comply with the standard, are damaged or
distorted,
-
obsolete or incorrect maps.
Recommendation
For a suggested maximum speed, the first
time that the vehicle's speed exceeds it by
more than 3 mph (5 km/h) (example: 59 mph
(95
km/h)), the speed flashes for 10 seconds.
In addition to Speed Limit recognition and
recommendation, the driver can select the
speed displayed as a speed setting for the
speed limiter or cruise control using the speed
limiter or cruise control memorisation button.
If rain is detected, the system will propose to
the driver a speed setting lower than the speed
read/obtained from the map to adapt to the
weather conditions (example: on a motorway,
the proposed speed will be 68
mph (110 km/h)
instead of 81
mph (130 km/h).
For more information on the Speed
limiter, Cruise control or Adaptive
Cruise Control, refer to the
corresponding sections.
To Next Page
Loading...
Need help?
General
