02
44
Access
Failure of the remote control
To deactivate the monitoring functions:
F
Unlock the vehicle using the key in the
driver's door lock.
F Open the door; the alarm is triggered.
F
Switch on the ignition; this stops the alarm.
The indicator lamp in the button goes off.
Locking the vehicle without
activating the alarm
F Lock or deadlock the vehicle using the key
(integral to the remote control) in the driver's
door lock.
Automatic activation
Malfunction
When the ignition is switched on, fixed
illumination of the red indicator lamp in the
button indicates a malfunction of the system.
Have it checked by a
dealer or a qualified
workshop.
Electric windows
1. Left-hand front.
2. Right-hand front.
3. Left-hand rear.
4. Right-hand rear.
5. Deactivation of the electric window
controls located at the rear seats.
Locking of the rear doors (depending on
version).
Manual operation
F To open/close the window, press/pull
the switch without passing the point of
resistance; the window stops as soon as the
switch is released.
Automatic operation
F To open/close the window, press/pull the
switch beyond the point of resistance; the
window opens/closes completely when the
switch is released.
Operating the switch again stops the movement
of the window.
The electric window switches remain
operational for approximately 45 seconds
after switching off the ignition.
Once this time has elapsed, the electric
windows will not operate. To reactivate
them, switch the ignition on again.
When the window rises and meets an obstacle,
it stops and immediately partially lowers again.
Safety anti-pinch
(Depending on country of sale)
The system is activated automatically 2
minutes
after the last door or the boot is closed.
F To avoid triggering the alarm on entering
the vehicle, first press the unlocking button
on the remote control or on the door handle
with the Keyless Entry and Starting system.
To Next Page
Loading...
Need help?
General
