DS Automobiles DS 3 CROSSBACK User Manual

7
Touch screen BLUETOOTH audio system
The version of software in the audio system
may not be compatible with the generation of
your Apple
®
player.
Media settings
Press the "Media Settings" button.
Activate/deactivate track playback options and
access the audio settings.
The audio settings are the same as the
audio settings for the radio. For more
information on the "Audio settings", refer
to the corresponding section.
Information and advice
The system supports USB mass storage
devices, BlackBerry
®
devices or Apple
®
players via the USB sockets. The adapter
cable is not supplied.
Device management is done by the audio
system controls.
Other devices, not recognised on
connection, must be connected to the
auxiliary socket using a
Jack cable (not
supplied) or via Bluetooth streaming,
depending on compatibility.
To protect the system, do not use a
USB
hub.
The audio equipment will only play audio files
with ".wav", ".wma", ".aac", ".mp3", ".mp4",
".m4a", ".flac", ".ogg" file extensions and with
a bit rate of between 32 Kbps and 320 Kbps
(300
Kbps maximum for ".flac" files).
It also supports VBR (Variable Bit Rate) mode.
Files of the ".wma" type should be to the wma
9
standard.
Sampling frequencies supported are 11, 22,
44 and 48 kHz.
It is recommended that file names be less than
20
characters long and do not contain any
special characters (e.g. " " ? . ; ù) so as to avoid
any reading or display problems.
Use only USB memory sticks in FAT or
FAT32 format (File Allocation Table).
It is recommended that the original USB
cable for the portable device be used.
Telephone
Pairing a Bluetooth
®
telephone
To complete the pairing, whichever procedure
is used (from the telephone or from the
system), ensure that the code is the same in
the system and in the telephone.
The services available depend on
the network, the SIM card and the
compatibility of the Bluetooth devices
used. Check for services availability in the
phone's manual and with the operator.
The profiles compatible with the system
are: HFP, OPP, PBAP, DID, A2DP,
AVRCP, SPP and PAN.
Up to 10
phones can be paired to the system.
Activate the Bluetooth function on the
telephone beforehand and ensure that it is
"visible to all" (telephone configuration).
Go to the Brand's website for more information
(compatibility, additional help, etc.).

DS Automobiles DS 3 CROSSBACK Specifications

General

Brand	DS Automobiles
Model	DS 3 CROSSBACK
Category	Automobile
Language	English