03
51
Ease of use and comfort
Folding the backrests
Folding or unfolding the seat backrests must
only be done with the vehicle stationary.
First steps:
F
Lower the head restraints.
F
If necessary, move the front seats forward.
F
Check that no person or object could
interfere with the folding of the backrests
(clothing, luggage, etc.).
F
Check that the seat belts are free, not
engaged in the buckles. Release them so
that the backrest can be moved.
When the backrest is released, the red
indicator is visible in the release handle.
Repositioning the backrests
First check that the outer seat belts are
lying vertically flat alongside the backrest
latching rings.
Please note: an incorrectly latched
backrest compromises the safety of
passengers in the event of sudden braking
or an impact.
The contents of the boot may be thrown
forward – risk of severe injury!
Heating and Ventilation
Air intake
The air circulating in the passenger
compartment is filtered and originates either
from the outside via the grille located at the
base of the windscreen, or from the inside in air
recirculation mode.
F
Press the backrest release handle 1.
F Guide backrest 2 down to the horizontal
position.
F
Put backrest 2 in the upright position and
push it firmly to latch it home.
F
Check that the red indicator is no longer
visible in the release handle 1.
F Ensure that the outer seat belts are not
trapped during the operation.
Controls
Depending on your vehicle, the controls are
accessible in the "Air conditioning" menu of
the touch screen or are grouped together on
the control panel of the centre console.
To Next Page
Loading...
Need help?
General
