DS Automobiles DS 3 CROSSBACK User Manual

03
50
Ease of use and comfort
Rear bench seat
Bench seat with fixed cushions and split folding
backrests (2/3-1/3) to adapt the boot load
space.
Rear head restraints
To refit a head restraint:
F
insert the head restraint rods into the guides
in the corresponding seat backrest,
F push the head restraint down as far as it
will go,
F press the lug A to release the head restraint
and push it fully down.
They have two positions:
-
a high position, for when the seat is in use:
F
pull the head restraint fully up.
-
a low position, for stowing, when the seat
is not in use:
F press the lug A to release the head
restraint and push it fully down.
To remove a
head restraint:
F
release the backrest using control 1,
F
tilt the backrest slightly forwards,
F
pull the head restraint as far up as it will go,
F
press the lug A to release the head restraint
and remove it completely.
Never drive with passengers seated at
the rear when the head restraints are
removed; they must be in place and in the
high position.
The head restraint for the centre seat
and those for the outer seats are not
interchangeable.
The rear head restraints can be removed.
Day/night position
Automatic "electrochrome" model
This system automatically and progressively
changes between day and night use by means
of a sensor measuring the light coming from the
rear of the vehicle.
In order to ensure optimum visibility during
your manoeuvres, the mirror lightens
automatically when reverse gear is
engaged.
F
Pull the lever to change to the "night" anti-
dazzle position.
F Push the lever to change to the normal
"day" position.
Manual model
Adjustment
F
Adjust the mirror so that the glass is in the
"day" position.

DS Automobiles DS 3 CROSSBACK Specifications

General

Brand	DS Automobiles
Model	DS 3 CROSSBACK
Category	Automobile
Language	English