08
184
In the event of a breakdown
Towing the vehicle
Procedure for having your vehicle towed or
for towing another vehicle using a
removable
mechanical device.
Access to the tools
The towing eye is stored with the on-board
tool kit (in a
bag on the boot carpet or in a box
under the boot carpet, depending on version).
For more information on accessing the Tool
kit, refer to the corresponding section.
Towing your vehicle
To access the front screw thread:
To be towed:
F
Screw the towing eye in fully.
F
Install the towbar.
F
Put the gearbox into neutral.
Failure to observe this instruction could
result in damage to certain components
(braking, transmission, etc.) and the
absence of braking assistance the next
time the engine is started.
Automatic gearbox: never tow the vehicle
with the driving wheels on the ground with
the engine off.
F
Unlock the steering and release the parking
brake.
F Switch on the hazard warning lamps on
both vehicles.
F Move off gently, drive slowly and only for
a
short distance.
On the boot carpet
Under the boot carpet
F
Unclip the cover by pressing at its top left
corner.
F Release the cover to the right and then
downwards.