10
01
Instruments
Displays during operation
Once the system has been activated, the
following information is grouped together in the
For more information on Navigation, refer
to the Audio equipment and telematics
section.
Buttons
Activation/Deactivation
F With the engine running, press button 1 to
activate the system and deploy the blade.
F Press and hold button 2 to deactivate the
system and retract the blade.
The system's state is saved and restored on
restarting the engine.
Height adjustment
- down to move the display down.
Brightness adjustment
F With the engine running, adjust the
brightness of the information display using
buttons 3:
-
on the "sun" to increase the brightness,
-
on the "moon" to decrease the
brightness.
When stationary or while driving, no
objects should be placed around the
blade (or in its recess) so as not to impede
movement of the blade and its correct
operation.
In certain extreme weather conditions
(rain and/or snow, bright sunshine, etc.),
the head-up display may not be legible or
may suffer temporary interference.
To clean the blade, use a
clean, soft cloth
(such as a
spectacles cloth or microfibre
cloth). Do not use a
dry or abrasive cloth,
or detergent or solvent products: risk of
scratching the blade or damaging the non-
reflective coating.
head-up display:
A. The speed of your vehicle.
B. Cruise control/speed limiter information
and, if the vehicle is so equipped, the
Road sign recognition function.
C. If the vehicle is so equipped, inter-vehicle
distance information, Lane Departure
Warning System information, Active Lane
Keeping Assist information, and automatic
emergency braking alerts.
D. If the vehicle is so equipped, navigation
information.
1. On.
2. Off (long press).
3. Brightness adjustment.
4. Display height adjustment.
F
With the engine running, adjust the display
to the desired height using buttons 4:
- up to move the display up,
To Next Page
Loading...
Need help?
General
