06
148
Driving
To start the assistance when approaching
a parking area:
F Reduce the speed of the vehicle to
a maximum of 19 mph (30 km/h).
F
Press the button on the gear selector or, on
the touch screen, select Driving/Vehicle >
DS PARK PILOT.
Activating the system deactivates Blind
Spot Detection.
Sequence
Once the system is activated, the following
steps will follow successively:
- Choice of the type of manoeuvre via the
touch screen.
-
Search for available space.
- Preparing for the manoeuvre.
- Execution of the manoeuvre.
- Finalising the manoeuvre.
It is possible to deactivate the system
at any time before the start of the
manoeuvre: press the red arrow in the
upper left corner of the screen.
DS PARK PILOT is not always able to
react automatically and appropriately due
to the performance limits inherent to the
system.
The manoeuvre remains the responsibility
of the driver, who must not leave the
driving position and must never try to lock
the system control button.
The driver's seat belt must remain
fastened during the manoeuvre.
Choice of the type of
manoeuvre and search for
space
Depending on whether the vehicle has been
driven or not since the ignition was switched
on, the function proposes the entry to or exit
from a
parking space on the touch screen.
F Select the type and side of the manoeuvre
to activate the parking space search.
Illumination of this indicator lamp
confirms activation.
The system manages control of the steering,
direction of driving, acceleration and braking.
It performs the measurements of available
parking spaces and calculations of distances to
obstacles using 12
ultrasonic sensors built into
the front and rear bumpers of the vehicle.
To assist the driver in monitoring the
correct manoeuvring operation, the system
automatically triggers the display of the
Reversing camera and activates the parking
sensors.
To Next Page
Loading...
Need help?
General
