04
75
Lighting and visibility
Switching on
F Give a short downwards push to the control
stalk.
This indicator lamp comes on in the
instrument panel, accompanied by
a message.
Switching off
F Give the control stalk another brief push
downwards or place the control stalk in
another position (Int, 1 or 2).
This indicator lamp goes off in the
instrument panel, accompanied by
a
message.
If the ignition has been off for more than
one minute, the automatic wipers must be
reactivated by pushing the control stalk
downwards.
Malfunction
If a fault occurs with the automatic wipers, the
wipers will operate in intermittent mode.
Have them checked by a dealer or a qualified
workshop.
A wiping cycle confirms that the instruction has
been accepted.