DSC Neo Power HS2016 User Manual

Chapter 6
6.0 Wireless Keys and other Devices
In addition to the keypad, the PowerSeries Neo system can be controlled using a variety of devices:
l 2-way wireless keys
l Proximity Tags
l via SMS using a cellphone
6.1 Using 2-way Wireless Keys
Note:Panic feature has not been evaluated by UL.
Note:All wireless key buttons are programmable. Verify the functions assigned to each key with your installer.
Note:When using compatible wireless keys there is one bell squawk for setting and two bell squawks for unsetting.
2-way wireless keys allow users in the close proximity of their house the ability to readily set/unset their system, and to call for
help. For information on enrolling wireless keys see: "User Labels (LCD keypads only)".
6.1.1 PG4929/PG8929/PG9929
6
7
1
2
3
4
5
1. Away Set
2. Stay Set
3. Unset
4. Panic
5. Command Output 1
6. Message LED
7. Status LEDs
6.1.2 PG4939/PG8939/PG9939
5
2
3
4
1
6
1. Away Set
2. Stay Set
3. Unset
4. Panic
5. Command Output 1
6. LED
6.2 Using Proximity Tags
The MPT proximity tag is ideal for people who have difficulties remembering codes or who do not interact with the system reg-
ularly. Depending on how your keypad is programmed, proximity tags can be used to either set/unset the system or to perform a pro-
grammed function (e.g. unlock a cabinet or storeroom door). To operate properly, proximity tags must be enrolled in the system.
The LED Bar flashes 3 times upon a valid proximity tag being read by the keypad successfully. If the proximity tag is invalid, the
LED Bar will stay ON and an error tone will sound
For more information see: "Enrolling and Deleting Proximity Tags".
6.3 SMS Command and Control
SMS Command and Control allows you to send text messages to your system, enabling the system to perform certain actions. For a
list of commands and how to send them see the following table. As a security measure, only phone numbers configured by your
installer will be permitted to contact your system. Messages from all other phone numbers will be rejected.
Note:This is a supplementary feature that has not been investigated by UL/ULC. Must be enabled and configured by installer.
Only supported with an LCD keypad.
6.3.1 Using the Keypad to Lookup the Number to Call for SMS Commands
The phone number of the system is programmed by the installer. To quickly find the phone number perform the following steps.
- 19 -

DSC Neo Power HS2016 Specifications

General

Brand	DSC
Model	Neo Power HS2016
Category	Security System
Language	English