DSC Neo Power HS2016 User Manual

Chapter 6
To find the System’s Phone Number LCD Display
1. Check that the Ready indicator is on and the system is unset.
Date Time
JAN 02/13 2:06a
2. Press [*][6]
OR
press [*]and use the scroll keys to navigate to User Functions press [*] and enter
[Master Code].
Press (*) for <>
User Functions
3. Press [1][1] or use the scroll keys to navigate to SMS Programming and press [*].
Press (*) for <>
SMS Programming
4. Scroll to navigate to SMS Programming and press [*]. The phone number to send your
SMS commands to displays.
Press (*) for <>
GSM Phone No.
6.3.2 Sending SMS Commands to your System
In order to successfully send commands to your system from your cellphone, you must send SMS messages in the proper format. If
configured, commands require the inclusion of a User Access Code in your message. The access code will be verified by the sys-
tem before executing any commands.
Additional information about sending SMS commands:
l Text messages are not case sensitive and extra spaces are ignored.
l In multi-partition systems and if the User has rights to manage the desired partitions, commands can be sent to specific
partitions by including the partition number. For more information on partitions see: "Managing Partitions".
l If the panel is configured to require an Access Code and the code is not sent or is invalid, the panel will send a noti-
fication to the user advising the command was unsuccessful.
The following table lists all available SMS commands with examples of how to enter the Partition number and access codes. The
format for entering commands is as follows:
Command Partitionnumber AccessCode
StaySet 001 1234
Note:Verify with your installer that the Partition number and access code are required in your SMS message. If one or both are
not required, do not enter them in your SMS message.
Note:Responses to Status and Alarm Memory requests may require more than 1 SMS message, depending on status of the system.
There is a 10 second delay between transmission of SMS messages.
6.3.3 SMS Commands
Commands Notes
StaySet Stay sets the system
AwaySet Away sets the system
NightSet Night sets the system
Unset Unsets the system
ActivateCommandOutput1 Activates Output 1
ActivateCommandOutput2 Activates Output 2
ActivateCommandOutput3 Activates Output 3
ActivateCommandOutput4 Activates Output 4
DeactivateCommandOutput1 Deactivates Output 1
DeactivateCommandOutput2 Deactivates Output 2
DeactivateCommandOutput3 Deactivates Output 3
DeactivateCommandOutput4 Deactivates Output 4
Bypass001 Bypasses specified zone number
Unbypass001 Clears the bypass from the specified zone number
StatusRequest Omitting the partition number causes the system to send a status report
for all partitions. To request a status report for a specific partition enter
the appropriate partition number.
AlarmMemoryRequest Omitting the partition number causes the system to send a status report
for all partitions. To request a status report for a specific partition enter
the appropriate partition number.
Help The Help command generates an SMS response listing all Interactive
commands that can be sent to the module. Access Code is not required.
- 20 -

DSC Neo Power HS2016 Specifications

General

Brand	DSC
Model	Neo Power HS2016
Category	Security System
Language	English