29
7. OPERATION PROCEDURES
7-4. SPECIAL FOLDING OF FIXED PAPER
Start special folding operations for fixed paper as follows.
1 Stack some paper on the paper feed
table.
2 Fold the paper as desired and
measure the folded paper. Adjust the
position of the folding stopper of the
folding plate accordingly.
• The figure on the right shows an example of an
accordion fold.
°
After the operations have completed, be sure to
lower the left and right levers attached to the
stacker lever in the direction of the arrow.
If the stacker rolls are left lifted up, problems will
occur when “folding mode” is executed with the
usual paper quantity.
Stacker rollers
Lever
Stacker lever
Belts
Paper
Paper set lever
Accordion fold
To Next Page
Loading...
Need help?
General