5
1. WARNING
1 Use only the power supply voltage displayed.
AC230V
Voltages Other than 230V Prohibited
Disconnect Plug
Prohibited
Prohibited
Prohibited
Prohibited
Check Capacity
2 Ensure that the total current of all the units connected to the wall outlet does not
exceed power supply capacity.
When using the extension cord, ensure that the total current of all the units con-
nected to this extension cord does not exceed the specification of the extension
cord.
If it exceeds the specified current or power supply capacity, fire hazards may result.
3 Do not scratch, damage, or remodel the power cord.
Do not place heavy objects on the power cord, nor pull or bend it.
Or the power cord will damage and cause fire and electric hazards.
6 Disconnect the power plug from the outlet by pulling the plug instead of the power
cord.
Pulling the power cord will damage the power cord and cause fire and electric haz-
ards.
7 If the power plug or cord becomes abnormally hot, first turn off the power switch
and disconnect the power plug from the outlet.
If used continuously in this state, fire and electrical hazards may result. Contact
your dealer.
4 Do not bind up the power cord even if it is too long, or this will cause poor heat
emission and fire hazards as a result.
5 Do not touch the power plug with wet hands, or electric hazards may result.
+ 6%
–10%
To Next Page
Loading...
Need help?
General