Duplo DF-520 User Manual

52
11-2. CROSS FOLDING FIXED PAPER
• The following describes the cross
folding shown in the figure and the
procedures for it.
• Start cross folding according to the
following procedures.
1 Set the “single fold” mode first and
fold the paper into two.
2 Set the single fold paper on the paper
feed table.
Face the folded edge of the paper as
shown in the figure (back of unit).
• To prevent folding slippage in the horizontal
direction and misfeeding, press the folded edge of
the paper with your hand firmly.
The amount of paper that can be folded is
approximately 2/3 (approx. 36mm) of the
height of the guide at the folded side.
11. CROSS FOLDING
36mm
Paper

Duplo DF-520 Specifications

General

Brand	Duplo
Model	DF-520
Category	Paper folding machines
Language	English