17
6. CONTROL PANEL
6-3. Energy Saving Mode Function
This unit has the following two functions for saving energy.
(1) Backlight automatic OFF function of LCD
The backlight of the LCD will go off automatically if the unit is not used for a certain period of time.
At shipment, the backlight is set to go off in 30 seconds.
(2) Power still ON alert function
If the unit is not used for a certain period of time, the buzzer will sound to indicate that the unit power is on.
At shipment, this function is set to OFF. To set it ON (enabled), contact your nearest dealer.
NoteNote
6-4. Types of Buzzer Sounds
This unit sounds the verification buzzer when keys on the control panel are pressed or when paper
has run out on the paper feed tray. The different types of buzzer are as follows.
“Pi”
Normal operating sound when the numerical key is entered, etc.
“Pi.Pi.Pi”
Warning buzzer to indicate operation error or that paper has run out.
“Pi...Pi...”
Indicates that the stop key has been pressed or the entered number of sheets to be processed has been reached.
“Pi.Pi...”
Indicates that a registration procedure (paper length registration, standard folding correction registration, custom
folding registration, etc.) has been completed.
“Pi...Pi...Pi...”
Indicates that problems such as paper jamming have occurred.
“Pi...”
Indicates that a registered value has been cleared.
To Next Page
Loading...
Need help?
General
